Gutter systems VINYLON
- Details
- Category: Products
![]() |
![]() |
|
|
The gutter systems VINYLON are good decision for water drainage from roof. They will reliably protect the facade and house foundation from moisture. |
Assortment and technical characteristics of gutter systems VINYLON
Gutter 125 It is necessary for drainage of water from the roof. Flowing on gutters the water gets to outlets. It is also the main part of gutter system. |
Length 3000 or 4000 mm |
![]() |
![]() |
Gutter pipe 90 Fastens on facade and forms a stack. The water flows down on this stack. |
Length 3000 or 4000 mm |
![]() |
![]() |
Universal corner 90° The corner elements are installed in the corners of a roof to change the direction of water current. There is a possibility to use them both for internal and external corners. |
|
![]() |
![]() |
Universal corner 135° The corner element of Vinylon gutter system is able to change the direction of water flow on the gutters by making a bypass of external and internal corners. |
|
![]() |
![]() |
Central outlet They unite gutters with stacks. They have special construction. Due to them the flow of water gets uniform and quick even in the time of showers. |
|
![]() |
![]() |
Universal end cap for gutter Closes the opened edge of gutter system Vinylon in the needed side and make all the system hermetic. |
|
![]() |
![]() |
Universal end cap of outlet Hermetically closes the outlet from the left or right side. |
|
![]() |
![]() |
Connective socket for gutters It is used in adjustment of gutters. Hermetically connects them among themselves. |
|
![]() |
![]() |
Protective grid of outlet It is installed inside the capacity of outlet closer to its bottom and delays the garbage. That helps to avoid the blockages of stacks. |
|
![]() |
![]() |
Arms for gutters It’s a fastening element by means of which the gutters are installed on the eaves. The construction is strengthened by stiffening ribs. Thanks to that the product withstands high loads in vertical and horizontal direction. |
|
![]() |
![]() |
Socket for pipe connection It is used in the adjustment of stack. It provides hermetical connection of its separate parts. |
|
![]() |
![]() |
Elbow of pipe 45° The elbow is used to change the configuration of stack and bypass the stick out of facade elements. |
|
![]() |
![]() |
Elbow of a pipe 67° It allows the elements of facade which hinder the stack to bypass. The water flow changes the direction and remains enough effective. |
|
![]() |
![]() |
Gully It is installed in the lower part of stack and protects the wall from the water. |
|
![]() |
![]() |
Pipe bracket It is used for fastening of pipes of gutter system Vinylon to a wall. |
|
![]() |
![]() |
Metallic arm It is a fastening element which is installed on rafters before the mounting of roof covering. It is used for installation of stacks of gutter system Vinylon. |
|
![]() |
![]() |
Call Us: +7 (978) 806-46-16; +7(978) 708-80-04
The biggest manufacturer of roof materials in Crimea, the company «Crimea roofing» offers different materials for finishing which could be perfect a decision for exterior finishing. Any construction could not do without internal and external finishing. The external finishing carries out not only esthetic function but also it helps to achieve practical purposes. The facing of facades is another important component of house-building. It is the facing that gives an attractive view to the house. The modern market of construction materials provides a huge choice of various construction materials for finishing and facing (for example bricks and decoration plasters). In the end of house-building there would be a need to buy a gutter system. The company «Crimea roofing» offers 3 kinds of gutter systems: the complex system Murol for making water drainage, popular system Vinylon and the most modern Polish system Bryza. Are you interested in buying gutter systems in Simferopol, Sevastopol, Yalta, Feodosiya or other cities of Crimea? – Then contact with our company «Crimea roofing».